Remote Management; Factory Defaults - Netis WF-2409 User Manual

4.10.4. Remote Management

WEB Management Status: the default is disable. Router can be accessed on the remote site
using "Web setup". Check the "Management Port" and enter the port number and then press
"save" button to enable web management.

4.10.5. Factory Defaults

Click "Restore default parameters" button, the Router will erase all of your settings and replace
them with the factory defaults, make sure you have backup current settings before click this
button.
Figure 4-63
Figure 4-64
70
WF-2409 User Manual