Mac Filtering - Netis WF-2403 User Manual

Follow the following steps to set Internet Access Control:
1. You can select "enable" and click "Save" to enable "IP Firewall" function. This is only the
first step, you should continued to create appropriate rules for "IP Firewall".
2. Input description information for current access control rule in the "Description" field. Input
IP address of host you want to restrict.
3. There are two items supplied, "Permit through the router for IP address listed, others are
denied" and "Deny through the router for IP address listed, others are permitted", Select the
item you want, and click "Save" button.
4. If you want to delete certain item on the list, select appropriate item on the list, click "delete"
to delete it.
3.9.3.

MAC Filtering


Status: the default is disable. You can filter wired users by enabling this function; thus
unauthorized users can not access the network.

Description: describe MAC Filter list to tell from different MAC Filter lists

Rule: you can select permit or deny. The default is permit

MAC address: input the MAC address that you want to control. The default format is
**-**-**-**-**-**（e.g.: 00-22-33-da-cc-bb）
Follow the following steps to set MAC filter:
1. Enable MAC Filter, then select save.
Portable Wireless-N Router/AP User Manual
Figure 3-50
39