Status; Wps Settings; Network; Dhcp - Netis WF-2403 User Manual

4) After finishing configure PORTABLE WIRELESS-N ROUTER /AP, please return to
your computer to change the IP address. You can use static IP or obtain an IP
automatically.

4.3. Status

Please refer to chapter 3.2 .

4.4. WPS Settings

Please refer to chapter 3.4 .

4.5. Network

Please refer to chapter 3.5 .

4.6. DHCP

Note: When the device works under client mode, it acts like a wireless adapter, don't need to
change this option. Keep its status disable, so your computer could get IP address from other
broadband device.

4.7. System Tools

Please refer to chapter 3.13 .
Portable Wireless-N Router/AP User Manual
Figure 4-10
51