Starting And Stopping Synchronization Manually; Changing Activesync Settings - Opticon H22 User Manual

12.2. Starting and Stopping Synchronization Manually

1. Turn on the device.
2. Connect the device to your PC using a USB cable.
3. Tap > ActiveSync.
4. To start synchronizing, tap Sync.
5. To stop synchronizing, tap Stop.
Figure 99. ActiveSync

12.3. Changing ActiveSync Settings

Changing which Information is synchronized
1. Tap > ActiveSync.
2. Tap Menu > Options.
3. Do one or more of the following:
Select the check box for the items you want to synchronize. If you cannot select a check box, Select the check box for the items you want to synchronize. If you cannot select a check bo
you might have to clear the check box for the same information type elsewhere in the list. you might have to clear the check box for the same information type elsewhere in the list.
Clear the check box for any items you want to exclude.
To customize synchronization of particular information, select the information type then click To customize synchronization of particular information, select the information type then click
Settings.
97
Opticon
H-22 User Manual 22 User Manual