Scanning And Reading Barcode Labels - Opticon H22 User Manual

Table of Contents

Selecting Recognized Barcode Types

The H-22 is capable of scanning and decoding various barcode types. To select or deselect the

22 is capable of scanning and decoding various barcode types. To select or deselect the

barcode types to scan for, perform the following steps:

1. Tap

> Settings > System > Scanner Setting > Code Options.

2. Select the check box next to the barcode types you want the reader to recognize.

Select the check box next to the barcode types you want the reader to recognize.

3. Deselect the check box next to the barcode types you don't want the reader to recognize.

4. Tap OK to save and exit.

14.2. Scanning and Reading Barcode Labels

The H-22 can scan and decode barcode labels, and it will normally output the data as keystrokes. (A

22 can scan and decode barcode labels, and it will normally output the data as keystrokes. (A

special application might alter that behavior, though) Therefore, to see the output of the barcode

scanner, open an application in which letters and numbers can be displayed.

NOTE: Barcode Reader must be enabled before you begin.

Open the application in which you want the decoded barcode to display after scanning.

Open the application in which you want the decoded barcode to display after scann

Point the barcode reader to a barcode label and press the scan key (left or right scan key, F1, or F2

depending on your trigger key setting).

NOTE:

Adjust the distance between your device and the label, and make sure the light emitted from

the scanner exceeds the width of the label.

103

H-22 User Manual

u don't want the reader to recognize.

herefore, to see the output of the barcode

Opticon

22 User Manual

Table of Contents