Table of Contents
Advertisement
15.3. GPS
The H-22 has a built-in GPS signal receiver that can be used to get the current location of the H
To do anything useful with the location information, a navigating program is required, which is not
To do anything useful with the location information, a navigating program is required, which is not
part of the standard software of the H-22. This should be purchased separately.
15.3.1.
GPS Settings
You may need to specify the GPS hardware port when installing the navigation software. The GPS
You may need to specify the GPS hardware port when installing the navigation software. The GPS
receiver in the H-22 can output the location data on a configurable port. To configure the port, follow
the steps below:
1. Tap
> Settings > System > External GPS > Programs.
2. Enter the port that will be used by the GPS receiver to send the data.
Figure 114. GPS Settings
15.3.2.
Using AGPS
AGPS (Assisted Global Positioning System) enables you to acquire a location faster
of a list containing current positions and orbits of GPS satellites.
To enable AGPS:
1. Tap
> Settings > System > Express GPS Connect.
2. Select "Download Now" to download AGPS data.
3. Tap OK to save and exit.
Improving the reception of Satellite Signals
It can take several minutes the first time you establish a GPS connection. If the device cannot
It can take several minutes the first time you establish a GPS connection. If the device cannot detect
the satellite signal, make sure the device has a clear view of the entire sky.
16. Battery Hot swap
H22 has hot swap feature implemented which makes it possible to change the main battery without
feature implemented which makes it possible to change the main battery without
turning off the device or loose data. When the battery cover is removed from
message not to remove the battery until the display has been turned off is displayed. The device will
message not to remove the battery until the display has been turned off is displayed. The device will
then automatically set the device in flight mode and disable all functionality but the absolute
then automatically set the device in flight mode and disable all functionality but the absolute
in GPS signal receiver that can be used to get the current location of the H-22.
22. This should be purchased separately.
le port. To configure the port, follow
Figure 115. Express GPS Settings
enables you to acquire a location faster with download
106
Settings
from H22 a warning
Advertisement
Table of Contents
