Table of Contents
Advertisement
13.5. Beaming Information
To use Bluetooth to receive beams, ensure Bluetooth is turned on and that your device is visible and
th to receive beams, ensure Bluetooth is turned on and that your device is visible and
within close range.
To enable incoming beams:
1. Tap
> Settings > Connections > Beam.
2. Select the check box next to Receive all incoming beams. See below left.
3. Tap OK to save and exit.
Figure 107. Receive Beams
To beam an item:
You can beam information from your H-22 such as an appointment in Calendar, a task in Tasks, a
contact card in Contacts, a picture in Pictures, or a file in File Explorer.
1. From the program (Calendar, Tasks, Contacts etc), select the item you want to beam.
From the program (Calendar, Tasks, Contacts etc), select the item you want to beam.
2. Tap Menu > Beam.
3. Your device will now search for and display visible devices. See above middle.
4. From the list of devices, select the device to which you want to send the item.
From the list of devices, select the device to which you want to send the item. See above right.
5. Tap OK to save and exit.
101
Figure 108. Beam Item
H-22 User Manual
22 User Manual
below left.
Figure 109. Visible Devices
. Visible Devices
ointment in Calendar, a task in Tasks, a
above middle.
Opticon
Advertisement
Table of Contents
