Installing The Battery - Opticon H22 User Manual

1.8. Installing the Battery

The H-22 ships with a Lithium-ion battery in the box. Charge the battery fully before the first use.
Perform the following procedure to install the battery.
Note: The battery can also be charged in the optional cradle.
1.8.1. Installing the Battery
Step 1:
Remove the battery cover. See
"Removing the Battery Cover" for
details.
1.8.2. Replacing the Battery Cover
Step 1:
Align the battery cover with the top of the battery bay. See Fig. 12.
Step 2:
Lower the cover in place. Secure it by turning the battery cover screws clockwise with a
coin. See Fig. 13.
Figure 12. Align the Battery Cover
23
Step 2:
Insert the battery (A) into the H-22 matching the
battery contacts with the contacts inside on the left
side of the H-22 case. Press down on the right side
of the battery to secure it in place (B).
See Fig 11.
Figure 11. Install the Battery
Figure 13. Lower the Battery Cover
Opticon
H-22 User Manual