Kenmore 721.80032 Installation Insrtuctions page 6

PART TOOL MATERIALS
YOU WILL NEED THE FOLLOWING TOOLS AND MATERIALS FOR THEINSTALLATION:
Carton or other heavy material for covering the counter top.
Clear tape Stud finder or thin nail.
(for taping the templates to the wail).
Saber saw
(for cutting vent holes for roof or wail venting).
Phillips screwdriver (for the screws).
Pencil
Fiat blade screwdriver (for the bolts).
Key hole saw (for the power cord hole).
3/8" and 3/4" wood drill bits
1/2" and 3/1 6"
drill bits
Plumb line
Measuring tape (metal preferred). Duct Tape
Small side cutters or tin snips Caulking gun
• If you have brick or masonry wails, you need special hardware and tools.
• The ductwork you need for the installation is not included. Aii wail and roof caps must have a back-draft
damper.