Kenmore 721.80032 Installation Insrtuctions page 4

YOUR SAFETY FIRST
• MAKE SURE YOU HAVE ENOUGH SPACE AND SUPPORT.
- Mount the oven against a flat, vertical wail, so that it is supported by the wail. The wall should be
constructed of minimum 2" x 4" wood studding and 3/8" thick drywall or piaster/lath.
- ATTACH AT LEAST ONE of the two lag screws supporting the oven to a vertical, 2" x 4" waJJ stud.
- DO NOT mount the microwave oven to an island or peninsula cabinet.
- BE SURE the upper cabinet and rear wail structures are able to support 150 Ibs., plus the weight of
any items you place inside the oven or upper cabinet.
- Locate the oven away from strong draft areas, such as windows, doors, and strong heating vents.
- BE SURE you have enough space. See Figure 4 below for minimum vertical and horizontal clearance.
WARNING
if you do not mount the oven as instructed, you risk personal injury and/or
property damage.
i._ Grounded Plug
30" rain°cabinet opening width
30" rain.clearancefrom bottom
of cabinetto cookingsurfaceor
countertop
(Use templatesincludedwith
installation instructions)
Figure 4
WARNING
Before you begin installing the oven, PLACE A PIECE OF THE CARTON OR OTHER HEAVY MATERIAL
(a blanket) over the countertop or cooktop to protect it. Do not use a plastic cover.
Failure to protect these surfaces could result inproperty damage.
4