4. Attach the Support Post (25) on the Backrest (26) to
the Seat Frame (11) with two M8 x 135mm Bolts (17),
four M8 x 20mm Washers (5), and two M8 Nylon
Locknuts (7).
5. Slide the Frame Extension (10) onto the Frame (1).
Attach the Frame Extension with six M8 x 12mm Bolts
(8) and six M8 x 20mm Washers (5).
6. The Console (30) requires two "AAA" batteries (not
included); alkaline batteries are recommended.
Remove the battery cover from the back of the
Console. Insert two batteries into the Console as
shown. Make sure that the batteries are oriented as
shown by the markings inside of the Console.
Then, reattach the battery cover.
4
5
5
1
6
Battery
Cover
Batteries
30
7
26
5
7
5
11
8
5
10
5
5
8
25
17