Assembly - Weslo Pursuit E 23 Bike User Manual

ASSEMBLY

To hire an authorized service technician to assemble the exercise cycle, call toll-free 1-800-445-2480.
Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the packing
materials. Do not dispose of the packing materials until assembly is completed.
In addition to the included tools, assembly requires a Phillips screwdriver , an adjustable
wrench , and pliers .
Use the drawings below to identify the small parts used for assembly. The number in parenthesis below each
drawing is the key number of the part, from the PART LIST on page 14. The number following the key number is
the quantity needed for assembly. Note: Some small parts may have been preassembled. If a part is not in
the parts bag, check to see if it has been preassembled.
M8 Nylon M5 x 15mm M8 x 20mm M5 x 10mm
M8 x 12mm Hex
Locknut (7)–2 Washer (66)–4 Washer (5)–14 Screw (31)–2 Screw (22)–2
M5 x 40mm
M8 x 12mm M8 x 20mm
Screw (4)–4 Bolt (8)–8 Bolt (18)–4
M8 x 135mm Bolt (17)–2
5