Network Settings; Basic - JVC VN-T216VPRU Instructions Manual

Fixed hd ip dome camera
Hide thumbs Also See for VN-T216VPRU:
Table of Contents

Advertisement

Network Settings

Basic

Figure 4-27 Audio Input
Audio Output
Ÿ
Audio Output: Set to "ON" when delivering audio to a speaker connected
to the camera,
Ÿ
Audio Output Level: Select among High, Mid and Low
Figure 4-28 Audio Output
Note: Audio Input/Output can have some noise and delay.
Please click the "Save" button to save your settings. You can also
click the left button "Reset to Default" to set all the data and
Note
options as defaults.
Basic
Figure 4-29 Network basic
Network
Ÿ
IP Address: Input your IP address here when you select "Manual".
Ÿ
Subnet Mask: Please use default number: 255.255.255.0. If the subnet
mask is not properly configured, the camera may not be able to communicate
with other devices on the network.
Ÿ
Default Gateway: leave it blank as default setting. It is unnecessary to
enter Default Gateway if it is not used. Ask your Network Administrator for
Default Gateway information.
Ÿ
Primary DNS: (same as above)
Ÿ
Secondary DNS: (same as above)
38

Advertisement

Table of Contents
loading

Table of Contents