Network Settings
IP Address Settings
(continued)
Changing the IP address using the Internet Explorer (continued)
4.
Launch the Internet Explorer
A
Enter the IP address of the unit.(Factory setting, http://
192.168.0.2, is available when there is no DHCP server.)
Notes:
● If the proxy server settings on access to the Internet via the Internet Explorer is enabled, you may
not be able to specify the IP address directly. In this case, change the proxy settings of the Internet
Explorer.
● After the [Security Settings] screen appears, press the [OK] button to proceed.
5.
Enter the user name and password (login as an administrator)
Note:
● After the [Security Settings] screen appears, press the [Yes] button to proceed.
24
A
Enter the user name.
This is set to admin by default.
B
Enter the password.
This is set to vn-c20 by default.
C
Click [OK].
B
Click [Go].