Feature Operations; Jet Selector Valves (Diverter Valves) - L.A. Spas 2012 North American Owner's Manual

the selection and move to programming the filter cycle frequency. It is not recommended to set the
filter cycle duration to 0.
4. Filter Cycle Frequency:
To adjust the number of filter cycles per day, press and hold the Program key to initiate the
programming mode. Then press the Program key four times to access the filter cycle frequency
programming. Press the Up or Down arrow key to cycle through the number of filter cycles, 1-4
cycles. The default setting is 2 cycles per day. Once the desired number of filter cycles is
displayed, press the Program or OK key to accept the selection and move to programming the
economy mode.
5. Economy Mode:
Press and hold the Program key to initiate the programming mode. Then press the Program key
five times to access the economy mode programming. Press the Up or Down arrow key to enable
or disable the economy mode. The display will show EP1 when the economy mode is enabled.
When the economy mode is disabled, the display will show EP0. Program default is EP1. Once the
desired setting is displayed, press the Program or OK key to accept the selection and move to
programming the economy start time.
6. Economy Start Time:
To adjust the start time of the economy mode, press and hold the Program key to initiate the
programming mode. Then press the Program key six times to access the economy start time
programming. Press the Up or Down arrow key to cycle through the hour between 0 and 23 in
increments of 1 hour. Program default setting is 0, which depicts a midnight start time. Once the
desired start time is displayed, press the Program or OK key to accept the selection and move to
programming the economy duration.
7. Economy End Time:
To set the end time of the economy mode, press and hold the Program key to initiate the
programming mode. Then press the Program key seven times to access the economy end time
programming. Press the Up or Down arrow key to cycle through 0-24 hours in increments of 1
hour. Program default is 6 hours. Once the desired duration is displayed, press the Program or
OK key to accept the selection and move to programming the temperature unit. It is not
recommended to set the economy duration to 0 hour.
8. Temperature Unit:
To adjust the temperature unit, press and hold the Program key to initiate the programming mode.
Then press the Program key eight times to access the temperature unit programming. Press the
Up or Down arrow key to toggle between Fahrenheit (°F) and Celsius (°C). Program default is °F.
Once the desired temperature unit is displayed, press the Program or OK key to accept the
selection and exit the programming sequence.

JET SELECTOR VALVES (DIVERTER VALVES)

Your spa may be equipped with a jet selector valve (diverter valve). This valve can be used to divert jet
power from one area in the spa to another area. This valve is fully adjustable and can be used to suit
the user's desired effect. The valve may be slightly harder to turn when the jet pump is on high speed.
This is normal due to high rate of water flow and pressure present in the valve.

FEATURE OPERATIONS

19
rev. 2012v1