Battery Access Panel (Cover Removed) - Tripp Lite 20kVA Owner's Manual

3-phase 20kva & 30kva intelligent true on-line ups systems
Hide thumbs Also See for 20kVA:
Table of Contents

Advertisement

Available languages

Available languages

2. Control Panels

2.2 Battery Access Panel (Cover Removed)

Individual models may vary slightly from diagram.
1
3
7
6
1.
Internal Battery Packs:
The number of included battery packs varies depending on UPS model number. Battery packs must replaced by a qualified electrician. Note: The
UPS system ships with the internal batteries disconnected. Refer to the Adding or Replacing Internal Batteries section for battery connection
instructions.
2.
Battery Cartridge Fuses:
with a blown fuse will not deliver any output voltage to the UPS system. The fuses must be replaced by a qualified electrician. (See section 7,
Adding or Replacing Internal Batteries for details.)
3.
Internal Battery Pack Connectors (Red & Black):
4.
Internal Battery Pack Jumper Cables (White & Blue):
5.
Battery System Connectors:
connects the battery module to an additional optional battery module (not shown, available separately from Tripp Lite). The battery system
connectors are only utilized when adding an additional battery module. Use of these connectors is outlined in the owner's manual included with the
additional battery module.
6.
Extended Runtime Capability:
number of open slots varies depending on UPS model number. All models accept the connection of an additional battery module (available
separately from Tripp Lite) to further extend runtime. Contact Tripp Lite for details.
7.
Fuse Block Bracket:
Accepts battery cartridge fuses.
( continued )
These supply backup runtime to connected equipment. Each pack consists of two strings (one positive and one negative).
Protect against short circuit damage. If a heavy overload or short circuit is encountered, a fuse will blow. A battery pack
Connect the individual internal battery packs to the overall battery system.
One connector (internal, not shown) connects the battery module to the power module. The other connector (shown)
Open slots accept additional internal battery packs (available separately from Tripp Lite) to extend runtime. The
Connect the internal battery pack strings together through the fuse block.
4
4
2
5

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents