Programme selector PCD
7.7
Remote Control Operation
20
To operate the door and have service control the CDC system can be connected to
a computer via the RS 232 connection "Read out". It can be connected directly or
via a modem.
Ask your local Besam distributor for more information.
MODEM
Software communication
To be able to communicate with the door Windows 3.1 or higher is needed. Make
following settings.
1. A)Windows 3.1/3.11.
Start terminal under Accessories.
B)Windows 95/98 or 2000XP.
Start hyperterminal under Accessories.
2. Make the following settings.
- Auto identification or VT100
- 8 bits data
- No parity
- One stop bit
- 9600 baud
Issued 2006-12-21
Com. port
MODEM
EAA792
1003090-EI-2.0