Access Code; Login To The Pcd; Logout From The Pcd; Change Access Code - Besam RD3 User Manual

Programme selector PCD
7.2

Access code

7.2.1
7.2.2
7.2.3
14
To be able to operate the PCD a login of access code must be done.

Login to the PCD

1. Type # to clear the display.
2. Type the access code, delivery code 1234, with the number key (four digits).
The display shows ==.
3. Type # to confirm the input.
If the access code is correct the display shows:
L I (Login)
0 1 (Level 01)
In case of two unauthorized attempts to access the PCD it takes five minutes
before a new attempt can be made.

Logout from the PCD

1. Type # to clear the display.
2. Type the access code. The display shows ==.
3. Type # to confirm the input.
If the access code is correct the display shows:
LO (Logout)
0 1 (Level 01)
4. Automatic logout ten minutes after the last key stroke.
5. Automatic logout can be inhibited by typing F561 on the PCD.

Change access code

At delivery the access code is 1234. To change do as follows:
1. Type # 1234 #. If the access code is correct the display shows:
L I (Login)
0 1 (Level 01)
2. Type The display shows:
F41.
F 4
L 1
3. Type new code (4 digits).
4. Type S to confirm.
5. Type the new access code a second time.
6. Type S to confirm.
Issued 2006-12-21 1003090-EI-2.0