The On/Off Switch; Changing Operating Mode - Besam RD3 User Manual

7.2.4
7.3

Changing operating mode

1003090-EI-2.0

The ON/OFF switch

The ON/OFF switch can be used in any operating mode (except manual mode). If
the door is locked with this switch (OFF), the prompt P1 is shown on the display.
Key impulse switch
Key impulse switch
If the door is locked with the ON/OFF switch it can be opened with a key impulse
switch (ask your local Besam Service). When the key impulse switch is activated,
the door unlocks, runs 360° and locks again.
1. Login to the PCD.
#Access code#
ILL-00177
2. Type F2. The display shows F2 plus current operating mode.
3. Use the up or down arrow to change the operating mode.
4. Confirm the change and exit the operating mode selection function by typing
S.
5. Logout from the PCD (automatically Logout after 10 min)
#Access code#
ILL-00177
Issued 2006-12-21
Programme selector PCD
Locked
ON/OFF switch
ILL-00175
S
ILL-00182
15