Table of Contents
Advertisement
AXIS 250S User's Manual
Appendix F - Technical Specifications
System Requirements -
and can be used with Windows 2000 or XP. Microsoft Internet Explorer 5.5, DirectX 8.1
and Windows Media Player 7.1 are required for viewing video streams.
Physical network connection using RJ-45 twisted pair cable. 10baseT or
Installation -
100baseTX Fast Ethernet.
Remote configuration and status using Web-based tools.
Management -
MPEG-2. User-controlled compression level.
Compression -
Configurable resolution, color and bit rate settings.
Video Features -
Input for composite video with no termination or 75 Ohm. NTSC and PAL.
Video Input BNC -
Input for S-Video. NTSC and PAL.
Video Input Y/C -
One 3.5mm microphone input for stereo or mono microphone. One 3.5mm
Audio Inputs -
stereo input for connecting line-in stereo or mono signal.
Stereo microphone input - High sens. Max:-39.0 dBu (25 mVpp)
Stereo microphone input - Low sens. Max:-18.1 dBu (270 mVpp)
Max:+2.7 dBu (3.0 Vpp)
Line input -
Supported Network protocols -
Terminal block connector A -
0.1 A). 1 pin for ground.
Terminal block connector B -
communication.
Pre/Post Alarm Buffer -
rate) of pre/post alarm video storage.
One 9-pin D-Sub RS-232, max 115 Kbps.
Serial Connector -
PTZ support via RS-232 or RS-485 for remote camera control. See
Pan/Tilt/Zoom -
www.axis.com or the on-line help for information about supported devices.
Multi-user and multi-level password protection.
Security -
Operating Conditions: -
The AXIS 250S uses the standard Internet TCP/IP suite of protocols
TCP/IP, HTTP, FTP, SMTP, NTP, ARP, DHCP, BOOTP.
2 digital inputs (max 12V in) and 1 transistor output (max 24V,
2 digital inputs (max 12V in), 2 pins for RS-485 serial
Approximately 3 MByte memory allows up to 1 minute (at low bit
o
o
Temp: 40
to 125
o
o
F (5
to 50
C), Humidity: 8-80% RH.
Technical Specifications
53
Advertisement
Table of Contents
