Cd Functions - Akai ARC120 User Manual

5.5

CD functions

● To select the CD function, slide the FUNCTION switch (16) to the CD
position.
● To insert a CD:
- Open the appliance with the OPEN button (18).
- Insert the CD with the label upwards.
- Close the CD compartment (19).
● Switch on the appliance. The display shows the total number of tracks on
the CD for two seconds. After two seconds, the appliance returns to clock
display.
● To start playback, press the PLAY/PAUSE button (11) once.
During playback, the following functions are available:
● To show the number of the track that is currently playing, press the
DISPLAY button (8).
● To select a track, press the SKIP BACKWARD/MINUTE button (14) or the
SKIP FORWARD/HOUR button (13) until the desired track is set.
● To search for a specific point on the disc, hold the SKIP BACKWARD/
MINUTE button (14) or the SKIP FORWARD/HOUR button (13) until the
point is reached and release the button.
● To pause playback, press the PLAY/PAUSE button (11) once; to resume
playback, press the button again.
● To stop playback, press the STOP button (12).
Using the REPEAT/RANDOM function
This function is available in PLAY and STOP mode.
● Press the REPEAT/RANDOM button (7) once to repeat the current track.
The repeat indicator (25) flashes.
● Press the button twice to repeat all tracks on the CD. The repeat indicator
(25) is ON.
● Press the button three times to play all tracks in random order.
The random indicator (28) is ON. The repeat function is now off.
● Press the button once again to exit the REPEAT function.
Using the PROGRAM function
To use the PROGRAM function for CD, the playback must be in STOP mode.
● To play a list of tracks (max. 64) in a program, press the PROGRAM
button (6).
ARC120
11