Cleaning And Maintenance; Handle And Care Of A Disc - Akai ARC120 User Manual

● Press the SKIP BACKWARD/MINUTE button (14) or the SKIP
FORWARD/HOUR button (13) to select a desired track.
● Press the PROGRAM button (6) to confirm the selection. Repeat the
previous step to select more tracks and confirm every selection with the
PROGRAM button (6).
● Press the PLAY/PAUSE button (11) to start the program.
● To check the program, press the PROGRAM button once during STOP
mode. Press the PROGRAM button repeatedly to see all the tracks in the
PROGRAM.
● To delete the program before the program starts, press the PROGRAM
button and then the STOP button. To delete the program during play,
press the STOP button.
i
A program is also deleted when the CD compartment is opened.
6.

Cleaning and maintenance

WARNING
!
Before performing any cleaning or maintenance, switch off and
unplug the appliance.
● Clean the outside of the appliance with a soft cloth. When the appliance is
very dirty, dampen the cloth slightly with water and a neutral solution.
● Clean the lens with a camera lens brush/blower (not included) if the lens
is dirty.
6.1

Handle and care of a disc

● Hold the disc with fingers. Hold the disc outer edge and/or the centre
spindle hole. Do not touch the disc surface.
● Do not bend or press the disc. Do not expose the disc to direct sunlight or
heating sources.
● Clean the disc surface with a soft, dry cleaning cloth. Wipe the disc
surface gently, radially, from centre towards the outer edge.
● Do not apply thinner, alcohol, chemical solvent, or sprays when cleaning.
Such cleaning fluids will permanently damage the disc surface.
12