Default Display; Status Display - Tripp Lite SmartOnline SU80K Owner's Manual

9 – Display and Configuration

9-3 Default Display

• After the UPS system starts up and completes the self-test, the
1
LCD status screen will show the default display. The default
display includes a status message and diagram that shows the
operational status of the UPS system.
When any event occurs, you will see the sign "!" flashes. You can press " " to see the details. For example:
Press " " again to go to the next message. If there is no further message, the screen will return to the default screen.

9-3-1 Status Display

• The UPS system output is off and the connected equipment loads
1
are not powered. This condition may be due to automatic UPS
shutdown or manually switching off the output circuit breaker
switch.
Possible causes:
• The UPS automatically shuts down by itself.
• Manually switch off the output circuit breaker.
(continued)
1
1
29
1
2
3
4
5
6
7
8
9
10
11
12
13