Tripp Lite SmartOnline Owner's Manual
  1. Manuals
  2. Brands
  3. Tripp Lite Manuals
  4. UPS
  5. SmartOnline
  6. Owner's manual
Tripp Lite SmartOnline Owner's Manual

Tripp Lite SmartOnline Owner's Manual

Single-phase 8kva—10kva intelligent true on-line ups systems (rackmount/tower)
Hide thumbs Also See for SmartOnline:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Owner's Manual
Owner's Manual
Single-Phase 8kVA—10kVA
Intelligent True On-Line UPS Systems (Rackmount/Tower)
• Detachable PDU features outlets and maintenance bypass switch* • Rackmount and tower adaptable
Important Safety Warnings
Mounting
Features
Connection
Optional Connection
Manual Bypass Operation
Operation
Storage and Service
Warranty and Warranty Registration
Español/Français
Customer Support: (773) 869-1234 • Application Services: (773) 869-1236 • www.tripplite.com
SmartOnline
• Includes power module, external battery module and PDU
*An optional detachable hardwire PDU is available; contact Tripp Lite for details.
Not suitable for mobile applications.
1111 W. 35th Street • Chicago, IL 60609 USA
Copyright © 2008 Tripp Lite. All rights reserved. SmartOnline is a trademark of Tripp Lite.
™
2
3
5
8
9
10
13
16
16
17/33

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SmartOnline and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Tripp Lite SmartOnline

Summary of Contents for Tripp Lite SmartOnline

  • Page 1 Warranty and Warranty Registration Español/Français 17/33 1111 W. 35th Street • Chicago, IL 60609 USA Customer Support: (773) 869-1234 • Application Services: (773) 869-1236 • www.tripplite.com Copyright © 2008 Tripp Lite. All rights reserved. SmartOnline is a trademark of Tripp Lite.

  • Page 2: Important Safety Warnings

    1-800-SAV-LEAD or 1-800-8-BATTERY (1-800-822-8837) or visit www.rbrc.com for recycling information. Tripp Lite offers a complete line of UPS System Replacement Battery Cartridges (R.B.C.).Visit Tripp Lite on the Web at www.tripplite.com/support/bat- tery/index.cfm to locate the specific replacement battery for your UPS.

  • Page 3: Mounting (Rack)

    2-Post (Telecom) Mounting To mount your equipment in a 2-post rack, you must purchase a Tripp Lite 2-Post Rackmount Installation Kit (model: 2POSTRMKITWM, sold separately) for each module installed. See the Installation Kit's owner's manual for complete mounting...

  • Page 4: Mounting (Tower)

    Mounting (Tower) Mount all modules in an upright, tower position using included base stands. The user must determine the fitness of hardware and procedures before mounting. The UPS system is shipped with two sets of plastic feet and extensions that can be used to tower mount the UPS’s power module, a battery module and a second battery module (9U total).

  • Page 5: Features

    Features Before installing and operating your UPS, familiarize yourself with the location and function of the features of each component. Power Module Front Panel Controls 1. LCD DISPLAY: This backlit (16 × 2 character) dot matrix display indicates a wide range of UPS operating conditions and diagnostic data.

  • Page 6: Features (Rear Panel)

    Features (Rear Panel) see page 7 for feature descriptions Power Module Detachable Power Distribution Unit Front Rear Left Side Battery Module...
  • Page 7 1. Input Terminal Block: Use these terminals to connect your power module to the detachable PDU. 2. External Battery Connector: Use this to connect one or more Tripp Lite battery modules to the power module. Remove the cover for access. The power module will not start without a connection to a charged battery module. Refer to the battery module owner’s manual for connection instructions and safety warnings.

  • Page 8: Connection

    Connection Hardwiring Cautions • Wiring must be done by a qualified electrician. • When making wiring connections, observe the cable connection regulations appropriate to your area [e.g. National Electrical Code (NEC) in the U.S.] at all times. Be sure to install an easily accessible disconnect switch in your installation wiring so you may cut off the UPS’s AC input during fires and other emergencies.

  • Page 9: Optional Connection

    This will allow full network monitoring and control of your UPS system. Install on your computer the Tripp Lite PowerAlert Software appropriate to your computer's operating system. Note: RS-232 serial communications are unavailable for PowerAlert Software monitoring while the SNMP/WEB Card is installed in the UPS system's accessory slot.

  • Page 10: Manual Bypass Operation

    Note: If desired, an optional hardwire detachable PDU is also available separately from Tripp Lite. Contact Tripp Lite for details. (Optional: During a hot-swap, the PDU can be housed in the back of the rack configuration using supplied PDU hanger brackets and hard- ware.
  • Page 11 Manual Bypass Operation (for power module maintenance or replacement) UPS Power/Battery Module Removal STEP 1. (Optional) Attach 2 PDU hanger brackets to the right-side, rear mounting rail using included screws and cage nuts. Important: determining where to attach your PDU hanger brackets will depend on your rack configuration. Generally it is recommended to mount the top bracket in the bottom two Mount Here square holes of the U space that the UPS and PDU are mounted in.
  • Page 12 Manual Bypass Operation (for power module maintenance or replacement) STEP 8: Loosen the screws in the contact cover . Slide the cover over the contacts . Tighten the screw to secure the cover. Warning: Use extreme caution when handling the PDU. Do not allow the contacts to touch any surface.

  • Page 13: Operation

    Failed Self-Test If a problem is detected during the self-test, the LCD will display a error message. If your UPS displays any of the following messages in its LCD, call Tripp Lite Technical Support at (773) 869-1234 for service. BAD BATTERY!

  • Page 14: Normal Operation

    Operation continued normal Operation During normal operation, the first line of your LCD Display shows which operating mode your UPS is in: Online, Economy, On Battery, or Bypass. Online mode: The UPS provides AC power while utility power is available and switches to On Battery mode instantly (zero transfer time) if AC power is interrupted.

  • Page 15: Shutdown Messages

    Operation continued Bypass Messages While in Bypass Mode, the UPS monitors its input voltage and passes that input power along to connected equipment. The UPS will not provide battery backup in Bypass Mode. If the output voltage deviates from an acceptable range (between 15% higher and 20% lower than nominal), the UPS displays the condition on its LCD and stops supplying output power to its load.

  • Page 16: Storage And Service

    10 days of purchase. The warranties of all TRIPP LITE surge suppressors are null and void if they have been connected to the output of any UPS system. The warranties of all TRIPP LITE UPS Systems are null and void if a surge suppressor has been connected to its output receptacles.
  • Page 17 1111 W. 35th Street, Chicago, IL 60609 USA 773.869.1234 (USA) • 773.869.1212 (International) www.tripplite.com 2009XXXXX 93-2647_EN...

This manual is also suitable for:

Smartonline su8000rt3uSmartonline su8000rt3uhwSmartonline su8000rt3u1tfSmartonline su10000rt3uSmartonline su10000rt3u2tf

Table of Contents