Table of Contents
Advertisement
32
To activate Follow Me Call Forwarding:
1. Lift the handset or press the ON/OFF button.
2. Dial the Follow Me Forward code [642] on the dial pad.
3. Dial station number of the station from which forwarding is
desired.
4. Dial the appropriate forwarding condition code.
[6] = All Calls
[7] = No Answer
5. Dial the three- or four-digit destination number where calls
are to be forwarded. (Station, Voice Mail, ACD/UCD, or Hunt
Groups.)
6. Replace the handset or press the ON/OFF button.
To remove Follow Me Call Forwarding:
1. Lift the handset or press the ON/OFF button.
2. Dial the Follow Me Forward code [642] on the dial pad.
3. Dial the station number of the station that forwarding is to
be cancelled.
4. Dial [6] (regardless of the forward condition).
5. Redial the same station number. Confirmation tone sounds
and FWD LED extinguishes.
To establish Follow Me Call Forwarding (off-site location):
1. Dial into the system on a DISA or TIE trunk. Enter the DISA
access code, if applicable.
2. Dial the Follow Me Forward code [642] on the dial pad.
3. Dial the station number of the station from which
forwarding is desired.
4. Dial the appropriate forwarding condition code.
[6] = All Calls
[7] = No Answer
[8] = Busy
[9] = Busy/No Answer
[8] = Busy
[9] = Busy/No Answer
Call Forward
Advertisement
Table of Contents
