Central Processing Unit (Cpu) - Asus KN97 User Manual

3. Central Processing Unit (CPU)

The ASUS KN97 motherboard provides a Single Edge Contact (SEC) slot for a
Pentium II processor packaged in an SEC cartridge (pages 18–22) or a Pentium Pro
processor installed in the ASUS C-P6SI Pentium Pro SEC Card (pages 23–24).
Pentium II Processor
WARNING! Be sure that sufficient air circulation is available across the processor's pas-
sive heatsink. Without sufficient circulation, the processor could overheat and damage both
the processor and the motherboard. You may install an auxiliary fan, if necessary.
You should check to see that you have the following 9 items. (NOTE: The pictures
in the following pages will have the same item numbers next to them for your refer-
ence. The design and color of your items may be slightly different.)
Attach Mount Bridges (Items 1,2)
(Factory Installed)
(5)
Pin
Base (7)
Heatsink Support Base/Top Bar (Items 4-7)
18
III. INSTALLATION
(1)
(2)
Top Bar (4)
Posts
(6)
Intel Pentium II Processor in a SEC Cartridge
(233-333MHz 256/512KB L2 Cache)
ASUS KN97 User's Manual
Lock Holes
Captive Nut
(3)
Pentium II Retention Mechanism (Item 3)
Larger Fin should
be on the bottom.
Pentium II Processor Heatsink (Item 8)
CPU (Item 9)
(8)
Heatsink bottom Groove
for the Support Top Bar