Table of Contents
Advertisement
3.5.2 VDSL Configuration
The VDSL Router provides two VDSL operation modes for applications. Users can select
the CO and CPE mode manually.
For CPE mode, the router works as a VDSL client device, the VDSL connection is based on
the CO side; users don't need to configure any VDSL settings on this mode.
For CO mode, the router works as a VDSL CO device such as VDSL DSLAM or Switch,
you can configure the VDSL basic parameters for your VDSL connection.
CPE Mode
The VDSL Router default is CPE mode, in this mode, all VDSL parameters will be blocked
and users don't need to configure it. Just connect to CO device for VDSL connection.
61
Advertisement
Table of Contents
