Code Lookup - Actron ABS BrakeScan CP9449 User Manual

This code indicates that you have a
current problem with the Network Bus
Communication for the ABS controller
and that the problem is illuminating the
ABS malfunction indicator lamp (MIL)
on the dashboard.

Code Lookup

Code Lookup accesses a library of possible DTCs for the selected vehicle.
✓
The Tool does not require power from the vehicle to perform this function.
✓
Code Lookup is only available from the Diagnostic Menu because the
user must select a vehicle prior to accessing the library.
From the Diagnostic Menu:
1. Select Code Lookup.
• Press the
arrow key until Code Lookup is
highlighted.
• Press ENTER.
2. Enter a Code.
• Codes come in two formats:
OBDII
more information about the possi-
ble formats, see "Understanding
DTCs" on page A-1.)
• All characters must be entered.
• Only one character can be
changed at a time.
• Use
keys to move to desired charac-
ter.
• Use
to change or select a character.
Press ENTER.
•
✓
If the definition can not be found, the
tool displays the message No Definition
Found.
✓
Check the Service Manual for the vehi-
cle for DTC definitions as well.
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 4 – 5
UP or DOWN
Non-OBDII
and . (For
LEFT or RIGHT arrow
UP or DOWN arrow keys
Vehicle Diagnostics
U2100
Controller Area
Network Bus
Communication
Current
DIAGNOSTIC MENU
======================
Read Codes
Review Codes
Code Lookup
System Setup
C0000
Use Arrow Keys
to Change digit.
Use to Select
digit to change.
ENTER to Show Code.
3 of 3
ABS
MIL Code
4