Actron ABS BrakeScan CP9449 User Manual page 29

2. View diagnostic results and
write down the DTCs
Four possible results can occur:
❒
If the information returned by the
vehicle does not match the vehicle
selected, you may get an
Unexpected Results message.
• To return to the Diagnostic Menu,
press ENTER.
• To examine the selected vehicle
information stored in the tool,
press
Main Menu and then select Vehi-
cle Diagnostics.
❒
If the tool is unable to display a
definition for all the DTCs returned by
the vehicle, you may get an
Unexpected Results - No
definitions found for some DTCs
error message.
• To view the DTCs, press ENTER.
• Press the
keys to scroll through the DTCs.
❒
If no codes are found, a message
appears indicating that No Codes
were Found.
❒
If DTCs are found, the code and a
definition will appear. For more
information about the structure of the
DTCs, see "Understanding DTCs"
on page A-1.
• Press the
keys to scroll through the DTCs.
Return to the Diagnostic Menu.
3.
• Press the
Note: On most vehicles, if you success-
fully repair the cause of the DTC, then
the ABS MIL should turn off after the
next drive cycle completes.
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 4 – 3
BACK to return to the
UP or DOWN arrow
UP or DOWN arrow
BACK key.
Vehicle Diagnostics
Unexpected Results
=====================
DTCs may be present
No definitions
found. Verify
selected vehicle
is correct.
Press ENTER to cont.
Unexpected Results
=====================
No definitions found
for some DTCs. DTCs
shown may be wrong.
Verify selected
vehicle is correct.
Press ENTER to cont.
PASS
No Codes Found
Press BACK to cont.
4