Table of Contents
Advertisement
Using the Tool
View Tool Information
This function allows you to view specific tool information that may be needed
when contacting customer service.
From System Setup menu:
1. Select Tool Information.
• Press the
3
• Press ENTER.
2. View the Tool Information.
• S/N (Serial No:)
• Software ID (SW ID:)
3. Write Down the Tool Informa-
tion.
• Space is provided on inside front
4. Return to System Setup.
• Press
Program Mode
The Program Mode is used to reprogram
the Tool. Instructions are provided with the
upgrades.
3 – 10 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
UP or
Tool Information
key until
highlighted.
cover of this guide to record the
Tool information.
BACK.
DOWN arrow
=====================
is
Adjust Contrast
Display Test
Keypad Test
Memory Test
Tool Information
Program Mode
=====================
S/N:
SWID:
=====================
Adjust Contrast
Display Test
Keypad Test
Memory Test
Tool Information
Program Mode
SYSTEM SETUP
Tool Information
1234567
A7B1
Press BACK
to Exit
SYSTEM SETUP
Advertisement
Table of Contents
