Table of Contents
Advertisement
Align the Backplate's Nuts with
the motherboard's Clip Support
installation holes and then fasten
to the motherboard.
Apply a suitable amount of the included Thermal Grease on the CPU's
surface and then fasten the Bolts to install the cooler.
Caution
Check the size of the silver-
colored bolts before installing
because silver-colored bolt A
and B have similar color.
Connect the cooler's 4-pin connector to the
motherboard's CPU Fan header.
Caution
Please make sure that PWM Control Mode is activated in the motherboard's BIOS settings.
Gold Bolts
(Socket 1366)
<Normal Mode>
.COM
Gold Bolt
(Socket 1366)
Sliver Bolt B (3mm)
(Socket 1156/1155/775)
Wrench
Sliver Bolts A (4mm)
Sliver Bolts B (3mm)
(Socket 2011)
(Socket 1156/1155/
775/AMD)
Fan RPM-reducing
resistance
<Quiet Mode>
7
Hide quick links:
Advertisement
Table of Contents
