ZALMAN CNPS9500 AT User Manual
Intel socket 1156/775 cpu core i5/ core 2 quad/core 2 duo/ core 2 extreme/ dual core pentium/ pentium d /pentium 4/ celeron d
Hide thumbs
Also See for CNPS9500 AT:
- User manual (9 pages) ,
- User manual (7 pages) ,
- User manual (9 pages)
Advertisement
Quick Links
Download this manual
See also:
User Manual
Advertisement
Related Manuals for ZALMAN CNPS9500 AT
Summary of Contents for ZALMAN CNPS9500 AT
- Page 1 User’s Manual CNPS9500 AT Intel Socket 1156/775 CPU Core i7 Core i5 Core 2 Quad Core 2 Duo Core 2 Extreme Dual Core Pentium Pentium D Pentium 4 Celeron D To ensure safe and easy installation, please read the following precautions.
-
Page 2: Specifications
Check the components list and condition of the product before installation. If any problem is found, contact the retailer to obtain a replacement. Zalman Tech Co., Ltd. is not responsible for any damages due to overclocking. During transportation of the system, the cooler must be removed. - Page 3 3. Components Thermal Grease Cooler User’s Manual Clip Support Clip Support Fixing Bolts Washers Clip Clip Fixing Bolts Nuts .COM...
-
Page 4: Installation Requirements
4. Installation Requirements 1) Space Requirements The cooler’s installation requires unobstructed space with dimensions of 90㎜ (width), 115㎜(length), 135㎜(height), and the CPU as a central reference point. Please check if components such as ODDs and PSU protrude into the required space. -
Page 5: Installation
5. Installation 1) Clip Support Installation Install the Clip Support to the motherboard according to the Socket-type. Bolt (silver) Clip Support Washer Caution ▶ Please make note of the Lever Slot’s direction when installing the Clip Support. 2) Thermal Grease Application Clear off any particles or residue from the CPU’s surface then spread (outwards from center) a thorough layer of Thermal Grease on the CPU and the base of the cooler. -
Page 6: Cooler Installation
3) Cooler Installation Insert the Clip Fixing Bolts to the Clip’s Installation Holes and fasten with a screwdriver. 4) Fan Connector Connect the Fan Connector to the motherboard’s PWM fan header (4-Pin). .COM... - Page 7 GS1000 / GS1000SE • E-ATX / Standard ATX / microATX Compatible * Supports Intel Dual Xeon server motherboards • UP to 6 Hot Swap HDD Bays * GS1000(3 Standard / 3 Optional) * GS1000 SE(Optional) • Tool-Free HDD Installation • Airflow Optimized Design •...