ZALMAN CNPS9900 Max User Manual page 11

Align the Backplate's Nuts
with the motherboard's
Clip Support's installation holes
and fasten to the motherboard.
Apply a suitable amount of the included Thermal Grease on the CPU's
surface and then fasten the Silver Bolts to install the cooler.
(Please use the designated Bolts in accordance with Socket Types.)
Caution
Check the size of the silver-
colored bolts before installing
because silver-colored bolt A
and B have similar color.
Connect the cooler's 4-pin connector to the
motherboard's CPU Fan header.
Caution
Please make sure that PWM Control Mode is activated in the motherboard's BIOS settings.
Wrench
Gold Bolts
(Socket 1366)
<Normal Mode>
.COM
Sliver Bolts A (4mm) Sliver Bolts B (3mm)
(Socket 2011) (Socket 1156/1155/
775/AMD)
Fan RPM-reducing
resistance
<Quiet Mode>
10