Status Indicators; Table 4: Router Status Indication - B&B Electronics SPECTRE User Manual

B&B Electronics, Inc.
4.2

Status Indicators

Label Color
PWR Green
WAN* Red
DAT* Yellow
USR Yellow
OUT Green
IN Green
ETH Green
ETH Yellow
PORT Green
PORT Yellow
SIM1* Yellow
SIM2* Yellow
* 3G models only
Note: The State indication of the PPP LED is updated every 10 seconds.
State
Blinking Router is ready
On Router is initializing.
Blinking Communication in progress
Flashing
PPP connection established
1 x flash per
Signal strength is from –50 dBm to –69 dBm
second
Signal strength is from –70 dBm to –89 dBm or the
2 x flash per
second difference between neighboring cells is exactly 3 dBm
Signal strength is from –90 dBm to –113 dBm or the
3x flash per
difference between neighboring cells is smaller than
second
3 dBm
Function selected by user
On Binary output active
On Binary input active
On Selected 100 Mbit/s
Off Selected 10 Mbit/s
On The network cable is connected
Blinking Data transmission
Off The network cable is not connected
LED functions for different router configurations appear in the charts
below.
LED functions for different router configurations appear in the charts
below.
On SIM card 1 is active
On SIM card 2 is active

Table 4: Router status indication

Description
16
SPECTRE User Manual
SPECTRE_User_Manual_2912m
www.bb-elec.com
www.bb-europe.com