Table of Contents
Advertisement
Provision Settings
The provision feature is for user to easily use ATA by plug & play without the complicated
setting procedures. (Auto provisioning system is an advanced feature of SIP ATA. For further
information on using this function, please contact your ISP.)
1.)
If the ISP supports the auto-provisioning system, please select the "TFTP Provision" item to be
"Enable". Otherwise, select "Disable".
2.)
Also, if user has got the TFTP server IP address from the ISP or network administrator, please
input it in the blank of "TFTP Server IP".
3.)
If user knows the firmware filename, please fill it in blank of "Firmware".
4.)
After above three steps, user should select "SUBMIT" button to deliver the new setting values to
device before the firmware upgrading.
5.)
After step 4, user can upgrade the firmware by selecting the "UPGRADE" button.
- 16 -
Advertisement
Table of Contents
