A1.2 Options; A1.3 Media; A1.3.1 Media Type - Century Eagle 4 Owner's Manual

APPENDIX 1 SPECIFICATIONS

A1.2 Options

Option Name
Scissor cutter module CE-CS4-01
Rotary cutter module
Dispense module
Ribbon saving
module
Expansion I/O
interface board
PCMCIA interface
board
Built-in LAN
interface board
USB interface board
NOTE:
To purchase the optional kits, please contact the nearest authorized Century Systems representative.

A1.3 Media

Please make sure that the media being used is approved by Century Systems. The warranty does not apply when a
problem is caused by using media that is not approved by Century Systems.
For information regarding Century Systems approved media, please contact a Century Systems authorized service
representative.
A1.3.1 Media Type
Two types of media can be loaded for this thermal transfer and direct thermal printer: label or tag. The table
below shows size and shape of the media available for this printer.
Stop
position
Cut position
Type
A stop and cut swing cutter.
CE-CR4-01 Rotary cutter
CE-DM4-01 Enables peel and present operation or internal label rewinding.
To purchase the strip module, please inquire at your local
distributor.
CE-RS4-01 This module moves the print head up and down by using a
solenoid to minimize ribbon usage as far as possible.
CE-CIO-01 Installing this board in the printer allows connection to an
external device with the exclusive interface.
CE-PCM-01 This board enables the use of the following PCMCIA cards.
LAN card: 3 COM 3CCE589ET (recommended)
ATA card: Conforming to PC card ATA standard
Flash memory card: 1MB and 4MB cards (See Section 2.9.)
CE-LAN-01 This board enables the printer to be used in a LAN network.
CE-USB-01 Installing this board enables a connection to a PC which has a
USB interface.
Black Mark
(on reverse side) Refer to
Label
NOTE 3 below.
Description
Stop
position
Cut
i i
Feed Direction
EA1- 2
ENGLISH VERSION CSE1-33034
Black Mark
(on reverse side)
Tag paper
A1.2 Options