Table of Contents
Advertisement
3. ON LINE MODE
3.4 Dump Mode
In Dump mode, any characters sent from the host computer will be printed. Received characters are expressed in
hexadecimal values. This allows the user to verify programming commands and debug the program.
(1)
The printer is turned on, standing by, or printing.
ON LINE
CE-4210
(2)
Press the [PAUSE] key.
PAUSE
52
CE-4210
(3)
During the Pause state, press and hold the [RESTART] key for 3 seconds or more.
The display shows "<1> RESET".
<1>RESET
(4)
Press the [FEED] key. The display shows "<2>PARAMETER SET".
<2>PARAMETER SET
(5)
Press the [FEED] key. The display shows "<3>ADJUST SET".
<3>ADJUST SET
(6)
Press the [FEED] key. The display shows "<4>DUMP MODE". Press the [PAUSE] key to enter the Dump Mode.
<4>DUMP MODE
BUFFER RS-232C
(7)
Select the receive buffer to be dumped with the [FEED] or [RESTART] key.
<4>DUMP MODE
BUFFER RS-232C
• RS-232C: RS-232C Receive Buffer
• CENTRO: Centronics Receive Buffer
[RESTART]
• NETWORK: Network Interface Receive Buffer
• BASIC 1: BASIC Interpreter (I/F → Interpreter buffer)
[FEED]
• BASIC 2: BASIC Interpreter (Interpreter → Printer buffer)
• USB: USB Receive Buffer
(8)
Select the printing method with the [FEED] or [RESTART] key.
[RESTART]
[FEED]
(9)
Press the [PAUSE] key to start printing. The printer prints the data in the selected receive buffer.
NOW PRINTING...
(10)
After completing the printing, the display returns to "<4>DUMP MODE".
<4>DUMP MODE
(11)
Reset the printer by turning the power off and on. The display shows "ON LINE".
ON LINE
V1.1A
The number of unprinted media (See NOTE.)
V1.1A
ON DEMAND
ALL
The printer prints 166 lines (approx.
50cm) and then pauses printing.
The printer prints all buffer data, and
then stops printing.
E3- 3
ENGLISH VERSION CSE1-33034
3.2 Operation
Advertisement
Table of Contents
