Replacing A Headlight Bulb - Yamaha FZS1000P Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
1. Headlight bulb cover
2. Headlight coupler

Replacing a headlight bulb

This motorcycle is equipped with two
quartz bulb headlights. If a headlight
6
bulb burns out, replace it as follows.
1. Remove panel B. (See page 6-9
for panel removal and installation
procedures.)
2. Disconnect the headlight coupler,
and then remove the bulb cover.
1. Headlight bulb holder
3. Unhook the headlight bulb holder,
EAU04226
and then remove the defective
bulb.
1. Do not touch this area.
_
Headlight bulbs get very hot. There-
fore, keep flammable products away
from a lit headlight bulb, and do not
touch the bulb until it has cooled
down.
_
4. Place a new headlight bulb into
6-39
WARNING
position, and then secure it with
the bulb holder.
EW000119