Onboard Device; Onboard Lan Boot Rom; Superio Device - Foxconn 45CMX User Manual

onboard Device

A��alia/AC97 Audio Select
Onboard LAN Controller

Onboard LAN Boot ROM

↑↓→←:Move Enter:Select
► Azalia/AC97 Audio Select
This item is used to select the operation of your audio controller. You can select A�alia for high
definition audio, or AC97 for legacy support. Select [Auto], system will automatically check it.
► Onboard LAN Controller
This item is used to enable or disable the onboard LAN controller.
► Onboard LAN Boot ROM
This item is used to enable or disable the onboard LAN boot optional ROM. A LAN boot ROM
lets you set up a diskless workstation on the network. By installing a boot ROM in the network
board, you can enable a client PC system on the network to be booted remotely.

SuperIo Device

Onboard FDC Controller
Onboard Serial Port 1
Onboard Serial Port 2
UART Mode Select
IrDA Duplex Mode
Onboard Parallel Port
Parallel Port Mode
x ECP Mode Use DMA
↑↓→←:Move Enter:Select
Phoenix - AwardBIOS CMOS Setup Utility
Onboard Device
[Auto] Auto
[Enabled]
[Disabled]
+/-/PU/PD:Value F10:Save
F5: Previous Values F7: �ptimi��ed Defaults
Phoenix - AwardBIOS CMOS Setup Utility
SuperIO Device
[Enabled]
Enabled
[3F8/IRQ4]
[2F8/IRQ3]
[IrDA]
[Half]
[378/IRQ7]
[SPP]
3
+/-/PU/PD:Value F10:Save
F5: Previous Values F7: �ptimi��ed Defaults
34
Item Help
ESC:Exit F1:General �elp
Item Help
Menu Level ►
ESC:Exit F1:General �elp