Table of Contents
Advertisement
Pairing Instructions
Headset and Transmitter
In order to play audio, the PX4 headset must be "paired" (linked) to its transmitter. The headset and transmitter are
paired out of the box. The instructions below are only necessary if pairing appears to have been lost.
1. Headset should be powered OFF. (Hold Power button for 3 seconds.)
2. Press and hold the Pair button on the transmitter for 5 seconds until the transmitter's Power/Link LED flashes
rapidly. Release.
3. Press and hold the headset's Power button for 6 seconds until you hear the second double-beep, then release. The
headset LED will flash rapidly (twice per second).
Note: You will hear a double-beep (headset on), followed by an ascending chime (Bluetooth on), then the second
double-beep (pairing headset).
4. Within 30 seconds, the transmitter Power/Link LED will remain on solid, and the headset Power LED will blink
steadily once per second, indicating that pairing was successful.
Left Earcup
Power Button /
Headset LED
* If pairing is unsuccessful on first attempt, please try again. It may take as many as five attempts to pair successfully.
Pair Button
Go to Table of Contents
Power/Link LED
30
Hide quick links:
Advertisement
Table of Contents
