Px4 Headset - Left View P6; Product View And Led Descriptions - Turtle Beach Earforce PX4 User Manual

PX4 Headset - Left View
2
4
3
1
7
6
5
Go to Table of Contents
1
To turn on/off the headset: Press and hold the
power button until you hear two rapid tones
To enter pairing mode(Headset off): Press and
hold the power button until the LED begins to
blink rapidly and evenly(about 6 seconds).
Tone Button: Press this button to activate the
2
different EQ presets. A beep will indicate which
preset is selected. (see pg. 28)
3 Blast Limiter Button: Press this button to activate
the different Blast Limiter presets. A beep will
indicate which preset is selected. (see pg. 28)
Variable Mic Monitor: Adjusts the level of your
4
voice heard in the headset. (see pg. 29)
NOTE: Turning up the mic monitor may cause the
mic to pick up room sounds which will make the
silence detector not automatically shut off the
headset when it's not being used. If the power is
not automatically shutting down, turn down this
mic monitor control.
Wired Chat Jack: Used for chat on the Xbox360/
5
PS4 (see pg 12 & pg 17)
6 Game Volume: Turn to adjust the game
sound level.
7 Removable Microphone with Adjustable Boom:
The microphone can be removed from the
headset when chat is not required by detaching it
from the boom.To properly position the mic: Make
sure that the triangle indicator on the Mic Boom
Plug is facing the headset. (The Metal Clip on the
Microphone Foam Cover should be facing away
from your mouth)
6