Download Print this page

Turtle Beach ear force w3 Operating Instructions

Wireless wii headphones

Advertisement

Quick Links

Installing the Battery
The W3 headphones are powered by
1 AAA battery (included) located in the
left ear cup. Lift the battery cover and
insert the battery before operating the
headphones. Then turn the power switch
on the right ear cup to the "on" position.
Connecting the Power Adapter
The W3 base unit is powered by a DC power
adapter, (included). Insert the power adapter
into the power jack on the back of the
base unit.
When the adapter is inserted into the base
unit and plugged into a wall socket, a red
light on the front of the base unit will light
up to indicate that power is active.
CAUTION: Use only the supplied power adapter.
Failure to use the correct adapter can result in fire,
damage to the unit or other hazards.
Connecting the Wii
Connect the transmitter, Wii and TV
or sound system as shown below.
This will allow you to hear the Wii with
either your sound system or W3
headphones.
Wii
TV or Sound System
Transmitter
Important: Do not put transmitter unit close
to the Wii sensor bar.
Connecting TV / Music Players
The W3 may be used for listening to
other audio sources, such as the output
of your TV, the output of your PC sound
card, an MP3 player, home theater
system, etc. In each case, simply connect
the output of the audio device to the
audio input jack on the base unit and set
the level control for optimum listening
volume.
Connecting to
Headphone Jacks
Use an optional 3.5mm to dual RCA
stereo splitter cable to connect your
wireless W3 headphones to standard
3.5mm headphone jacks, such as an
Ipod®, MP3 player, TV output, etc.

Package Contents

• W3 wireless headphones
• Transmitter base unit
• DC power adapter
• 1 AAA battery
• This User's Guide
For warranty information please visit
http://support.turtlebeach.com
Copyright © 2010 Voyetra Turtle Beach, Inc. (VTB, Inc.) All rights
reserved. No part of this document may be reproduced without
permission. The Turtle Beach Logo, Ear Force and Turtle Beach are
registered trademarks of VTB, Inc. Nintendo is a registered trademark
and Wii is a trademark of Nintendo. All other trademarks are
properties of their respective companies and are hereby
acknowledged. Product features, visual design, prices, package
contents and speci cations are subject to change without notice.
Part# TBS-2090 V1
3
W
®
Wireless Wii Headphones
TM

Operating Instructions

For more products, accessories, and our support
knowledge base, visit www.turtlebeach.com

Advertisement

loading

Summary of Contents for Turtle Beach ear force w3

  • Page 1: Package Contents

    Copyright © 2010 Voyetra Turtle Beach, Inc. (VTB, Inc.) All rights CAUTION: Use only the supplied power adapter. Transmitter Failure to use the correct adapter can result in fire, reserved.
  • Page 2 Wii remote control after setting master volume control on the use infrared (IR) technology to up the Ear Force W3 headphones, then, headphones. Before placing the transmit sound from the base unit to you may have to adjust the Wii remote's headphones over your ears, set the the headphones.