Preset Channels 0 ~ 9 : Instant Access; Programmimg; Operation - Standard Horizon HX280E Owner's Manual

6.8 PRESET CHANNELS 0 ~ 9 : INSTANT ACCESS

Ten user assigned channels can be programmed for instant access. Pressing
the [ PRESET ] key activates the user assigned channel bank. If the [ PRESET ]
key is pressed and no channels have been assigned, an alert beep will be
emitted from the speaker.
6.8.1 PROGRAMMING
1. Select the desired channel to be assigned into the Preset Channel Bank
using the [ ] or [ ] key.
2. Press and hold the [ PRESET ] key until the Preset Chan-
nel Number " " is shown at the right of the channel num-
ber on the display.
3. Repeat steps 1 and 2 to program the desired channels into Preset Chan-
nels " " ~ " ".
4. To delete a Preset Channel, select the Preset Channel Number to be de-
leted using the [ ] or [ ] key, then press and hold the [ PRESET ] key until
the Preset Channel Number is removed from the display.

6.8.2 OPERATION

Pressing the [ PRESET ] key will toggle between Preset Channels " " through
" " and the last selected "regular" channel. Preset Channel
" " is represented by " " to the right of the channel number
on the display for one second, and preset channel " " is
represented by " " and so forth. The preset channel number
will disappear after one second.
HX280E Page 17