Serial Port Communication Parameters (Config.txt) - inout Panelplayer User Manual

9.2 Serial port communication parameters (config.txt)

The parameters of the RS485 serial port (length of the packs, parity, speed, etc.) are set
via the configuration file config.txt.
Example file config.txt:
LLOU=10
Audio adjustment parameters
LTRE=14
LBAS=10
CMAD=0
CMCK=1
CMCL=0
CMBR=3
CMPR=0 RS485 serial port communication parameters
CMSB=1
CMDB=8
CMDR=0
CMNR=0
These parameters must coincide with those of the outside device with which Panelplayer is to
communicate.
IMPORTANT:
 To make the modification of these parameters effective, it is necessary to restart
Panelplayer after having introduced the flash memory with the file config.txt.
 If Panelplayer is not used with Playlist or as music player, set MPLL=0 in the config.txt.
IMPORTANT:
Conditions in which a transmission sequence is initialised.
The Panelplayer transmission sequence is initialised under the following conditions:
 When Panelplayer is turned on.
 When the data communication has been normally completed.
 When the timeout time for receiving a pack has expired.
Panelplayer User Manual v.1.4
notes for the Master system
Page 34