Stop & Play Priority Playlist - inout Panelplayer User Manual

6.4 MPLL=10: Stop & Play Priority playlist
Operating mode:
 Activated the input, the relative item in the Playlist is played: at the end of it, Panelplayer
goes in standby, awaiting a further activation. Activating the input once again or if the
activation remains, the successive file is played.
 Repeated activations or deactivations of the same input or of other inputs does not
influence the playing of the file.
 The position of the last item played is stored in memory, in order to start out again
always by the next one in case of restart.
 The playlist is activated in loop, as long as the activation of the relative logical input
remains activated.
INPUT
none
IN 1
IN 2
IN 3
IN 4
IN 5
IN 6
IN 7
IN 8
N.B. If several inputs are activated, the playlist relevant to the lowest input is activated. For
example, if IN4 and IN5 are active, the playlist 4.m3u is played.
Panelplayer User Manual v.1.4
RELATIVE PLAYLIST
= Standby
= 1.m3u
= 2.m3u
= 3.m3u
= 4.m3u
= 5.m3u
= 6.m3u
= 7.m3u
= V
LINK function
Page 20