Amplifier Connection To 40W Bridge - inout Panelplayer User Manual

8.2 Amplifier connection to 40W bridge

Panelplayer has the capability of commuting the stereo output of the amplifier in a 40W
mono bridge configuration, to pilot a single diffuser with greater power.
To enable this operational mode, in addition to having a different connection to the output
clams, it is necessary to set the following configuration parameters in the config.txt file:
OMON=1
INVR=1
OMON STEREO / MONO audio output switch
0= STEREO audio output
OMON
1= MONO audio output
INVR Inverted R channel audio output switch
0= R channel not inverted ( STEREO )
INVR
1= Inverted R channel ( MONO/BRIDGE configuration )
Panelplayer User Manual v.1.4
Page 31