inout Panelplayer User Manual page 4

7. Operation with logical inputs
7.1 Introduction to the logical input operation mode
7.2 Binary input command codes
8. Special operations
8.1 Connection of two Panelplayers with different programming
8.2 Amplifier connection to 40W bridge
9. RS485 serial communication
9.1 RS485 communication
9.2 Serial port communication parameters (config.txt)
9.3 Framing error on master
9.4 NAK reply by Panelplayer
9.5 Transmitting a command by master
9.6 How to read the figures of the dedicated protocols
9.7 When the Master delivers a command to Panelplayer
9.8 Basic format of the dedicated protocols
9.9 Basic set-up of the data transmission
9.10 Control codes
9.11 Address (ADD)
9.12 Command (CMD)
9.13 CheckSum (CHK)
9.14 Basic protocol
9.15 Basic protocol with CheckSum
9.16 Basic protocol with CR and LF
9.17 Basic protocol with CheckSum, CR and LF
9.18 List of commands
9.19 Error codes
10. Specifications
10.1 Technical features
10.2 Obsolete devices disposal
Addendum:
Examples of serial RS485 communication
Panelplayer User Manual v.1.4
Page 3