Table of Contents
Advertisement
4
Configuration file
4.1 What is the configuration file?
Panelplayer is a very versatile device which can be adapted to the needs of the application
in which it is used. Different applications may require adjustment of volume, tone,
loudness, special parameters of communication or timing. The text file, called
'configuration file' and stored in the main directory of the flash memory, together with the
audio files, makes it possible to programme the various parameters of Panelplayer.
This file must be assigned the name config.txt (this extension has been used so it can be
modified by any text editor, including those for portable PocketPC terminals).
4.2 Content of the configuration file
Each line of the configuration file consists of:
Mnemonic code of the parameter to be set. It always consists of four CAPITAL
alphanumeric characters, and must always be at the beginning of the line. No more
than one parameter is permitted on the same line.
Separating character. '='. This MUST be inserted just after the mnemonic code, without
any spacing or tabulation character.
The relevant numerical parameter expressed as a decimal, to be inserted directly after
the separation character, without any spacing or tabulation character.
Example of file config.txt:
LOUT=14
LLOU=10
Audio adjustment parameters
LTRE=14
LBAS=10
MOMD=0
TPCM=10
MICP=1
Logical inputs parameters (direct or binary combinaton)
MIRS=0
IMOD=0
Playlist/music player mode parameter
MPLL=14
CMAD=0
CMCK=1
CMCL=0
CMBR=3
RS485 serial port communication parameters
CMPR=0
CMSB=1
CMDB=8
CMDR=0
CMNR=0
Panelplayer User Manual v.1.4
Page 10
Advertisement
Table of Contents
