Advertisement
3. CONTROL ELEMENTS
Strain Clamp
2=Hot(+)
3=Cold(-)
Use for Balanced Mic Inputs
(For unbalanced use, connect pin 1 to 3)
3-pin XLR Male Plug
(seen from soldering side)
TIP RING SLEEVE
TIP RING SLEEVE
TIP RING SLEEVE
5.3. RACK MOUNTING
The most secure mounting is on a universal rack shelf available from various rack
manufacturers or your Dealer . The X23 Active Crossover fits into one standard 19"
rack unit of space. Please allow at lease an additional 4" depth for the connectors
on the rear panel. Be sure that there is enough air space around the unit for
sufficient ventilation and please do not place your X23 Active Crossover close to
high temperature devices such as power amplifiers etc. to avoid overheating.
5. INSTALLATION AND CONNECTION
Tip
Sleeve
Ring
Use for Insert Points
1/4" Stereo (TRS) Jack Plug
2
1
1=Ground/Screen
3
SLEEVE TIP
SLEEVE RING TIP
Insert Leads
Ring=Return Signal
Sleeve=Ground/Screen
2=Hot(+)
Use for Main output
(For unbalanced use, leave pin3 unconnected)
3-pin XLR Line Socket
(seen from soldering side)
Tip
Ring
Sleeve
Tip
Ring
Sleeve
Tip
Ring
Sleeve
Tip=Send Signal
2
1
1=Ground/Screen
3
3=Cold(-)
Tip (Send)
Sleeve
Tip (Return)
Sleeve
1
2 (Send)
3
1
2 (Return)
3
Centre (Send)
Screen
Centre (Return)
Screen
7
Advertisement
