Fujitsu Siemens Computers SCENICVIEW P20W-3 Operating Manual page 28

SCENICVIEW P20W-3/P22W-3
Settings functions
Calls up the Setup settings window
Selecting the input signal
Input select
This function is used to select the input signal (VGA, DVI or HDMI).The condition is
that the graphic card used supports this function.
Setting the language for the OSD menu
Language
This function is used to choose between English (default setting), French, German,
Italian, Spanish, Russian, Dutch or Swedish as the language for the OSD menu.
Activation/deactivation of the DDC-CI
DDC-CI
On = the DDC-CI function is activated (standard setting).
Off = the DDC-CI function is deactivated.
Setting the horizontal position of the OSD menu
OSDH-position
This function is used to move the OSD menu to the left or to the right.
Setting the vertical position of the OSD menu
OSDV-position
This function is used to move the OSD menu up or down.
Setting the display duration of the OSD menu
OSDTimeout
With this function you select a value from 10 to 120 seconds.
If the set time expires without a setting being made, the OSD menu is automatically
faded out.
Activating the factory settings
Factory recall
With this function all settings are reset to the factory settings without prompting for
confirmation.
Press the SELECT/MENU button to activate the function. The Auto Processing
message is displayed.
Displaying information
Calling the Information setting window
With this function the model designation, serial number, resolution, H/V frequency,
input signal and polarity of the synchronisation signal are displayed.
20 A26361-K1175-Z120-1-7619, edition 1